Socket and test 4x4mm QFN with 0.5mm pitch using stamped spring pin contact that has 14g force per pad, cycle life of 125,000 insertions, and operates at -55C to +180C. Ironwood Electronics, Inc. offers high performance test sockets and adapters for both engineering and production use of semiconductor devices. IC packages covered include QFN, BGA, […]
Ironwood Electronics introduces near device size footprint test socket incorporating high performance GT elastomer. Specific package to be tested is a BGA with mixed pitch 0.6×0.675mm and 8.7×14.4mm device size. GT elastomer with SMT board provides bandwidth up to 43GHz. Ironwood Electronics, Inc. offers high performance test sockets and adapters for both engineering and production […]
Test a 75 watt BGA device with high performance elastomer using a simple swivel lid mechanism. Elastomer connects each signal with -1dB insertion loss at 94GHz frequency to PCB. Heatsink with fan keeps BGA device junction temperature not exceeding 100°C. Ironwood Electronics, Inc. offers high performance test sockets and adapters for both engineering and […]
Test and debug 17x17mm IC, 0.8mm pitch with high performance elastomer socket with 94GHz bandwidth while operating at -55°C to +160°C. Heatsink compression screw can dissipate 12 watt power at room temperature. Ironwood Electronics, Inc. offers high performance test sockets and adapters for both engineering and production use of semiconductor devices. IC packages covered include […]
Ironwood Grypper sockets are great for enabling fast easy swap out of a BGA device for development sorting and failure analysis. The Grypper socket allows you to simply snap in the BGA device into the socket – No Lid needed. The Grypper sockets are the same size as the device, “ZERO FOOTPRINT SOCKET”, so they […]
Test your BGA153 device using high performance 31GHz spring pin socket and low 14g force per pin. Small footprint (only 2.5mm larger than device per side) allows capacitors and resistors be placed very close to device. Swivel lid provides easy open/close operation for device swapping. Ironwood Electronics, Inc. offers high performance test sockets and […]
Pnuematic lids are a new option for controlling socket contact force. Great option for maintaining reliable force for applications in temperature cycling, high contact force and/or for sensitive devices. The option is available for any new custom or existing sockets. ©2025 Ironwood Electronics. All rights reserved
Test, debug, setup using manual actuator for production run of MSOP10 in Esmo Talos handler. Picoraptor2 test contact in cartridge configuration can test 500K devices before replacement is needed. Since the whole cartridge can be replaced instead of rebuilding with individual pins, downtime is very minimal enabling high production throughput ©2025 Ironwood Electronics. All […]
Connect adapter plate to the test socket, place device inside, and latch thermal chuck. Actively control 10 watt DUT from -40°C to +155°C using Imperium Thermal System. ©2025 Ironwood Electronics. All rights reserved
Quickly and easily Socket your 0.5mm pitch 15×6 array, FCCSP78 packages on any application board with performance equivalent to direct solder version using high speed and low inductance elastomer that operates from -55°C to +160°C.
Aereospace
Agriculture
Automotive
Automation
Consumer
Device
EDP
Electric Vehicle
Equipments
Lighting
Marine
Medical
Military
Railway
Renewable Energy
System
Telecom
Wireless