XSLS Series 0.25mm Pitch Connector for Micro Coaxial Cable (Stacking Type)

Compact connector with a low profile of 1.44 mm (0.057’’) and a mating width of 3.05 mm (0.120’’).
For micro coaxial cable (#42 AWG, #44 AWG, #46 AWG).
Signal terminals are soldered by Pulse Heat in one shot and keep a stable & highly reliable connection.
Equipped with a metal shell, noise reduction and product strength are ensured.
Multiple ground terminals are provided for enhanced transmission characteristics and EMS protection.
Highly reliable design with effective mating length of 0.31mm (0.012’’).
Nickel barrier of the board side contact prevents solder wicking.
Possible to put through narrow tube with a diameter of φ2.7mm (φ 0.106”) even after soldering.
The bottom of the connector is covered with resin, thus circuit may be printed under the connector.

Number of contacts: 30 pin, 40 pin

Type: XSLS00 Receptacle (PCB side connector) with suction pick-up surface · PN’s: XSLS00-30-A, XSLS00-30-B, XSLS00-30-C, XSLS00-40-A, XSLS00-40-B, XSLS00-40-C 

Type: XSLS01 Without suction pick-up surface · PN’s: XSLS01-30-A, XSLS01-30-B, XSLS01-30-C, XSLS01-40-A, XSLS01-40-B, XSLS01-40-C 

Type: XSLS20 Plug (Cable side connector) · PN’s: XSLS20-30-A, XSLS20-30-B, XSLS20-30-C, XSLS20-40-A, XSLS20-40-B, XSLS20-40-C,

XSLS Series